AL
Auto-Feed Soldering station

AL - Auto-Feed Soldering station
This is the ideal solution for extensive soldering applications or when a free hand is required.

The AL station automates the soldering process by feeding solder wire.

It is possible to select continuous or discontinuous operation modes.

It incorporates the JBC exclusive heating system with the intelligent sleep and the hibernation feature.

AL station works with the comfortable AL250 Auto-Feed Iron and C250 cartridges.
Available in the following references:
120 V - Ref.

230 V - Ref.

100 V - Ref.

Selectable parameters
Temperature
90 to 450 ºC / 190 to 840 ºF
Solder wire length
1 to 60 mm / 0.04 to 2.36 in
Solder wire speed
0.5 to 30 mm/s / 0.02 to 1.2 in/s
Operating modes
Continuous / Discontinuous
Solder compatibility
Wire diameter
0.4 to 1.8 mm / 0.02 to 0.07 in
Special features
These modes lower soldering tip temperature when the tool rests in the stand in order to avoid oxidation and extending tip life.
Max/Min temperature and
solder wire length/speed:
Limits the ranges of temperature, solder wire feeding length and speed in which the operator is allowed to work.
PIN protection
Keep station parameters protected against unauthorized access.
ESD/EOS
ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
Power supply
Peak power
130 W - 23.5 V
Voltage (AC)
Ref. AL-1A - 120 V
Ref. AL-2A - 230 V
Ref. AL-9A - 100 V
Ambient operating temp.
10 to 40 ºC / 50 to 104 ºF
Dimensions and weight
Control Unit
195 x 200 x 240 mm / 5.81 kg
7.7 x 7.9 x 9.4 in / 12.81 lb
Package
368 x 368 x 195 mm / 6.72 kg
14.5 x 14.5 x 7.7 in / 14.82 lb
Control Units:
AL auto-feed
Cartridges:
Cartridges Range
Connectable tools
Stands
Accessories
Follow us: