The Most Efficient Soldering System

The system recovers tip temperature extremely quickly. This increases work efficiency and lowers the soldering temperature.

JBC heating system principles

- The compact element optimizes heat transfer by reducing the thermal barriers.

- The fully integrated thermal sensor to the heater ensures an extremely quick temperature recovery.

- The intelligent algorithm used in the heating control system increases performance

JBC system can reach 350ºC (662ºF) in only 2 seconds, while others need between 10 and 90 seconds.

JBC, the most efficient soldering process

This innovative technology allows a reduction of the temperature by at least 50ºC.

Lowering the temperature reduces the risk of damaging components and improves the quality of soldering and desoldering.

JBC Stations only drop 20ºC (68ºF) where others drop as much as 70ºC (158ºF)


The Intelligent Heat Management

Thanks to automatic detection of the tool in the stand, JBC Soldering and Rework Stations are able to make the tools entering in  Sleep & Hibernation  mode when not being used.

As a result, tip life lasts up to 5 times longer than with conventional systems.

Sleep Mode

Sleep mode automatically lowers tip temperature below solder melting point when the tool rests in the stand.

It prevents the dissolution of tips iron coating into molten solder.

Hibernation Mode

After a configurable period of tool inactivity in the stand (10 min factory default), the tool enters in Hibernation mode. It cuts off power supply making the tip to reach room temperature thus preventing oxidation and saving energy.

Longer Tip life

Tip life increases exponentially by using a lower tempearture for a shorter time, as shown in the graph.

JBC tips last 5 times longer than other brands thanks to the Exclusive Heating System and the Intelligent Heat Management: Sleep & Hibernation functions.


Increased Productivity

Save time by using the quick cartridge extractor, which is available in all stands and Compact Stations. This system designed by JBC allows the user to change cartridges quickly and safely. Without switching the Station off, you can carry out different soldering jobs.

move the cartridge from the handpiece. Place the tool and pull up slightly to release it.

Insert the cartridge to use into the handpiece. Push slightly.

Select the hole depending on the tip shape. Place the cartridge to the suitable hole and push again.

JBC - time to reach
Follow us:
Copyright © 2011 JBC S.L. | Legal Notice | Privacy Policy | Terms and Conditions | Cookie policy | Site Map | RSS Feed | JBC Store | Contact Us