DISCONTINUED

100 V - Complete Rework station with Pneumatic Pump
Ref.
RMVE-9B

RMVE-9B - Complete Rework station with Pneumatic Pump
The quickest and safest solution for soldering and rework, also using Hot Air.

It consists of stackable modules and all the necessary accessories to make your job easier.

It works with the JBC exclusive heating system and the intelligent sleep & hibernation modes.

It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.

The RMVE works simultaneously with the DR560 Desoldering Iron, the T245 Handle and
the JT-TA Heater Hose Set and is compatible
with most JBC tools.

Required compressed air at the operator´s bench.
Specifications
Net Weight and DimensionsSee individual modules
Voltage100 V
Input FuseDDE: 5A / JT: 8A
Output Peak PowerDDE: 150 W per tool
Nominal PowerJT: 700 W
Temperature selectionJT: 150-450ºC (300-840ºF) or Cool mode: Temp Off
DDE: 90-450 ºC (190-840 ºF)
Idle Temp. Stability (still air)DDE: ± 1.5 ºC (± 3 ºF)
Ambient operating temp.10-40 ºC (50-104 ºF)
Air Flow RegulationJT: 10-50 SLPM
Flow rateMVE: 15 SLPM
VacuumJT: 30% / 228 mmHg / 9 inHg
Vacuum (at 6 Bar)MVE:90%/680 mmHg/26.8 inHg
Air pressure4-6 Bar (Max. 6 Bar)
Rated currentJT: 7A
Tip to ground resistanceDDE: <2 ohms
Tip to ground voltageDDE: <2 mV RMS
Communication connectorsJT: USB-B
Robot connectorDDE:USB-A/USB-B/Peripherals
Robot connectorDDE: RJ12 for RS-232 protocol
Pedal connectionJT and MVE: P-005 Pedal
ESD Safe
Package weight16.6 kg (36.5 lb)
Package dimensions480 x 375 x 390 mm
Documentation

Manuals:
RMVE-B Manual(3.77 Mb)

Brochures:

Exploded View:
Exploded View(503 Kb)
Follow us:
Copyright © 2011 JBC S.L. | Legal Notice | Privacy Policy | Terms and Conditions | Cookie policy | Site Map | RSS Feed | JBC Store | Contact Us