The NANE Station is the best solution for soldering and rework of SMT components requiring the highest precision.
It works with the JBC Most Efficient Soldering System and the intelligent Hibernation mode.
This station comes with two NT115 Nano Handle. The short distance from the tip to the handle offers maximum control even when using a microscope.
The NASE-C Rework Station works with the C115 Cartridge Range.
As all the JBC Stations, the NANE has a menu with more than 10 parameters to customize the control unit.
It works with the JBC Most Efficient Soldering System and the intelligent Hibernation mode.
This station comes with two NT115 Nano Handle. The short distance from the tip to the handle offers maximum control even when using a microscope.
The NASE-C Rework Station works with the C115 Cartridge Range.
As all the JBC Stations, the NANE has a menu with more than 10 parameters to customize the control unit.
REFERENCES
NANE-9C
100 V
NANE-1C
120 V
NANE-2C
230 V
PRODUCT COMPOSITION
- 1
NAE Control Unit
SPECIFICATIONS
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Connectivity
Pedal ( 1 per tool)
Connect a pedal (ref.P-405) to control the tools. It allows using Nano tweezers for soldering.
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update Soldering Graphics management
Robot
RS-232 remote control or Smart Fume Extractor connection.
Equipotential bonding
Optional connection to EPA
ESD/EOS
ESD safe
Tip to ground resistance
< 2 ohms
Tip to ground voltage
< 2 mV RMS
Power supply
Peak power
14 W per tool – 8.5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Control Unit
170 x 90 x 135 mm / 2,50 kg
6.7 x 3.5 x 5.3 in / 5.40 lb
Package
280 x 280 x 164 mm / 2,94 kg
11.0 x 11.0 x 6.5 in / 6.49 lb
