Nitrogen improves the quality of any solder joint as it provides extra heat and helps prevent tip oxidation.
The MNE-A regulates nitrogen flow to the soldering tip in order to optimize consumption.
It automatically activates the flow when you remove the Nitrogen Handles (T210-NA, T245-NA or T470-NA) from the stand. The flow stops when the Handle is placed back and the tip temperature drops to the sleep temperature.
It requires the GN-A Nitrogen Generator or an available nitrogen supply at the operator´s bench.
The MNE-A can be joined to any port of the DDE, DME & HDE control units and has the possibility to be controlled by the P-005 Pedal.
The MNE-A regulates nitrogen flow to the soldering tip in order to optimize consumption.
It automatically activates the flow when you remove the Nitrogen Handles (T210-NA, T245-NA or T470-NA) from the stand. The flow stops when the Handle is placed back and the tip temperature drops to the sleep temperature.
It requires the GN-A Nitrogen Generator or an available nitrogen supply at the operator´s bench.
The MNE-A can be joined to any port of the DDE, DME & HDE control units and has the possibility to be controlled by the P-005 Pedal.
SPECIFICATIONS MNE-A STATION
Net weight
1,14 kg (2.52lb)
Size
55 x130 x140 mm
(2.17 x 5.12 x 5.51 in)
Voltage
24V (from control unit)
Power
3W
N2 Pressure Range Supply
3-5 Bar
Max. Pressure
6 Bar
N2 Flow Regulation
0.5 - 3 SLPM
Recommended N2 flow
1-2 SLPM
Ambient operating temp.
10-40 ºC / 50-104 ºF
ESD safe
Package weight
1,30 kg (2.86lb)
Package dimensions
243 x 115 x 75 mm
(9.57 x 4.53 x 2.95 in)
