RMSE / RMVEComplete Rework Station
JTSE - Hot Air

Hot Air

JTSE

SRWS-S - SMD Rework System

SMD Rework System

SRWS-S

RMSE / RMVE - Complete Rework

Complete Rework

RMSE / RMVE

NASE - Nano Rework

Nano Rework

NASE

NANE - Nano Soldering

Nano Soldering

NANE

CDE-S - Smart Soldering Station

Smart Soldering Station

CDE-S

CDE-B - Smart Soldering Station

Smart Soldering Station

CDE-B

CPE - Micro Tweezers

Micro Tweezers

CPE

CAE - Solder Feed

Solder Feed

CAE

CSE-CVE - Desoldering

Desoldering

CSE-CVE

CD-S - Precision Soldering

Precision Soldering

CD-S

CD-B - General Purpose

General Purpose

CD-B

CA - Solder Feed

Solder Feed

CA

CP - Micro Tweezers

Micro Tweezers

CP

CS-CV - Desoldering

Desoldering

CS-CV

HDE - Heavy Duty

Heavy Duty

HDE

HDE-K - HDE TWEEZER STATION

HDE TWEEZER STATION

HDE-K

DDSE / DDVE - 2 Tools DDE Station

2 Tools DDE Station

DDSE / DDVE

DDPE - 2 Tools DDE Precision Station

2 Tools DDE Precision Station

DDPE

DMPSE / DMPVE - 4 Tools DME Station

4 Tools DME Station

DMPSE / DMPVE

AL - Auto-Feed Soldering Station

Auto-Feed Soldering Station

AL

SF - Automatic Solder

Automatic Solder
Feeder

SF

WS - High-Temperature Wire Stripper Station

High-Temperature Wire Stripper Station

WS

TESE - Precision Hot Air

Precision Hot Air

TESE

JTSE - Hot Air

Hot Air

JTSE

SRWS-S - SMD Rework System

SMD Rework System

SRWS-S

RMSE / RMVE - Complete Rework

Complete Rework

RMSE / RMVE

NASE - Nano Rework

Nano Rework

NASE

NANE - Nano Soldering

Nano Soldering

NANE

CDE-S - Smart Soldering Station

Smart Soldering Station

CDE-S

CDE-B - Smart Soldering Station

Smart Soldering Station

CDE-B

CPE - Micro Tweezers

Micro Tweezers

CPE

CAE - Solder Feed

Solder Feed

CAE

CSE-CVE - Desoldering

Desoldering

CSE-CVE

CD-S - Precision Soldering

Precision Soldering

CD-S

CD-B - General Purpose

General Purpose

CD-B

CA - Solder Feed

Solder Feed

CA

CP - Micro Tweezers

Micro Tweezers

CP

CS-CV - Desoldering

Desoldering

CS-CV

HDE - Heavy Duty

Heavy Duty

HDE

HDE-K - HDE TWEEZER STATION

HDE TWEEZER STATION

HDE-K

DDSE / DDVE - 2 Tools DDE Station

2 Tools DDE Station

DDSE / DDVE

DDPE - 2 Tools DDE Precision Station

2 Tools DDE Precision Station

DDPE

DMPSE / DMPVE - 4 Tools DME Station

4 Tools DME Station

DMPSE / DMPVE

AL - Auto-Feed Soldering Station

Auto-Feed Soldering Station

AL

SF - Automatic Solder

Automatic Solder
Feeder

SF

WS - High-Temperature Wire Stripper Station

High-Temperature Wire Stripper Station

WS

TESE - Precision Hot Air

Precision Hot Air

TESE

RMSE / RMVE
Complete Rework Station

RMSE / RMVE - Complete Rework Station
The RMSE / RMVE is the quickest and safest solution to solder and rework all kind of SMDs. It consists of stackable modules and all the necessary tools and accessories to make your job easier including, the DR560 Desoldering Iron, the T245 General Purpose Handle and the JT-TA Hot Air Heater.

The DDE manages up to 2 tools simultaneously and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools. The JTSE Hot Air Station controls the rework task using temperature and air flow profiles.

The Desoldering Module generates the vacuum needed to remove the molten solder from plated through hole and surface mount pads with the DR560. There are two station models, the RMSE which works with an electric pump and the RMVE which works with compressed air supply.

It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.

It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.
Equipped with Electric Pump:
RMSE-9QE
100 V
RMSE-1QE
120 V
RMSE-2QE
230 V
Temperature (DDE)
90 to 450 ºC / 190 to 840 ºF
Temperature (JTSE)
150 to 450 ºC / 300-840 ºF
Air Flow (JTSE)
5 to 50 SLPM
Operation modes (JTSE)
Heating / Profiles / Cooling
Vacuum (MSE)
75% / 570 mmHg / 22.4 inHg
Flow rate (MSE)
9 SLPM

Vacuum (JTSE)
30% / 228 mmHg / 9 inHg
Connectivity
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update.
Soldering Graphics / Profiles management.
Robot
RS-232 remote control or Smart Fume Extractor connection
Type K thermocouple (JTSE)
Can be used both for Control and Protection purposes.
Pedal
Optional tool control
Equipotential bonding
Optional connection to EPA

ESD/EOS
ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS

Power supply
Peak Power (DDE)
150 W per tool – 23.5 V
Peak Power (JTSE)
700W
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Dimensions/Net weight
See individual modules
Package
370 x 480 x 380 mm / 16.50 kg
14.6 x 18.9 x 15.0 in / 36.38 lb
Equipped with Pneumatic Pump:
RMVE-9QE
100 V
RMVE-1QE
120 V
RMVE-2QE
230 V
Temperature (DDE)
90 to 450 ºC / 190 to 840 ºF
Temperature (JTSE)
150 to 450 ºC / 300-840 ºF
Air Flow (JTSE)
5 to 50 SLPM
Operation modes (JTSE)
Heating / Profiles / Cooling
Vacuum at 6 bar (MVE)
90% / 680 mmHg / 26.8 inHg
Flow rate (MVE)
15 SLPM
Air pressure supply (MVE)
up to 6 bar
Vacuum (JTSE)
30% / 228 mmHg / 9 inHg
Connectivity
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update.
Soldering Graphics / Profiles management.
Robot
RS-232 remote control or Smart Fume Extractor connection
Type K thermocouple (JTSE)
Can be used both for Control and Protection purposes.
Pedal
Optional tool control
Equipotential bonding
Optional connection to EPA

ESD/EOS
ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS

Power supply
Peak Power (DDE)
150 W per tool – 23.5 V
Peak Power (JTSE)
700W
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Dimensions/Net weight
See individual modules
Package
370 x 480 x 380 mm / 16.50 kg
14.6 x 18.9 x 15.0 in / 36.38 lb