RMSE / RMVEComplete Rework Station

RMSE / RMVE
Complete Rework Station

RMSE / RMVE - Complete Rework Station
The RMSE / RMVE is the quickest and safest solution to solder and rework all kind of SMDs. It consists of stackable modules and all the necessary tools and accessories to make your job easier including, the DR560 Desoldering Iron, the T245 General Purpose Handle and the JT-TA Hot Air Heater.

The DDE manages up to 2 tools simultaneously and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools. The JTSE Hot Air Station controls the rework task using temperature and air flow profiles.

The Desoldering Module generates the vacuum needed to remove the molten solder from plated through hole and surface mount pads with the DR560. There are two station models, the RMSE which works with an electric pump and the RMVE which works with compressed air supply.

It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.

It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.
Equipped with Electric Pump:
RMSE-9QF
100 V
RMSE-1QF
120 V
RMSE-2QF
230 V
1
MSE Electric Desoldering Module for DDE & DME
JTSE Control Unit
Peak power
700 W
Selectable temperature
150 to 450 °C / 300 to 840 °F
Air flow regulation
5 to 50 SLPM
Vacuum
30% / 228 mmHg / 9 inHg
Profiles
25 (up to 10 steps for each), 1 preset profile
Type K TC connector
1 for Control & Protection
ESD safe
Meet ANSI / ESD S20.20-2021
Equipotential bonding
Connection to EPA
Graphics and profiles
RJ12 Connector
Remote control or FAE Fume Extractor connection
Pedal connector
Tool control
DDE Control Unit
Peak power
150 W per tool
Selectable temperature
90 to 450 ºC / 190 to 840 ºF
Temperature accuracy
±3%
ESD safe
Meet ANSI/ESD S20.20-2021
Equipotential bonding
Optional connection to EPA
Tip-to-ground resistance
<2 ohms
Tip-to-ground voltage
<2 mV RMS
Graphics and profiles
FAE / Robot connector
Remote control or FAE Fume Extractor connection
MSE Module
Vacuum
75% / 570mmHg / 22.4inHg
Flow rate
9 SLPM
ESD safe
Meet ANSI/ESD S20.20-2021
ESD safe
Weight and dimensions
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Temperature (DDU)
90 to 450 ºC / 190 to 840 ºF
Temperature (JT)
150 to 450 ºC / 300-840 ºF
Air Flow (JT)
5 to 50 SLPM
Operation modes (JT)
Heating / Profiles / Cooling
Vacuum at 6 bar (MVE)
90% / 680 mmHg / 26.8 inHg
Flow rate (MVE)
15 SLPM
Air pressure supply (MVE)
up to 6 bar
Vacuum (JTSE)
30% / 228 mmHg / 9 inHg
Connectivity
USB-B
Software PC / Traceability
USB-A
Firmware update.
Soldering Graphics / Profiles management.
Robot
RS-232 remote control or Smart Fume Extractor connection
TC Type K (JT)
Can be used both for Control and Protection purposes.
Pedal connector
Optional tool control
Equipotential bonding
Optional connection to EPA

ESD/EOS
ESD safe
Tip-to-ground resistance
<2 ohms
Tip-to-ground voltage
<2 mV RMS

Power supply
Peak Power (DDU)
150 W per tool – 23.5 V
Peak Power (JT)
700W
Operating temp. range
10 to 50 ºC / 50 to 120 ºF
Weight and dimensions
Dimensions/Net weight
See individual modules
Package
370 x 480 x 380 mm / 16.50 kg
14.6 x 18.9 x 15.0 in / 36.38 lb