DMPSE / DMPVE4 Tools DME Station
DMPSE / DMPVE
4 Tools DME Station

The DMPSE / DMPVE station is a complete solution to rework circuits and it comes with the T245 General Purpose Handle, the DR560 Desoldering Iron, the T210 Precision Purpose Handle and the AM120 Adjustable Micro Tweezers

The DME Control Unit manages up to 4 tools simultaneously and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools.

The Desoldering Module generates the vacuum needed to remove the molten solder from plated through hole and surface mount pads with the DR560. There are two stations models, the DMPSE which works with an electric pump and the DMPVE which works with compressed air supply.

It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.

It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.
Don’t believe us...
TRY IT!
REFERENCES
DMPSE-9QD
100 V
DMPSE-1QD
120 V
DMPSE-2QD
230 V
PRODUCT COMPOSITION
SPECIFICATIONS
DME Control Unit
Nominal power
200 W
Peak power
150 W per tool
Selectable temperature
90 to 450 ºC / 190 to 840 ºF
Idle temp. stability (still air)
±1.5 ºC / ±3 ºF / Meets and exceeds
IPC J-STD-001F
Temperature accuracy
±3 % (using reference cartridge)
Temp. adjustment
±50 ºC / ±90 ºF through station setting menu
Tip to ground vol./ resist.
Meets and exceeds
ANSI/ESD S20.20 and IPC J-STD-001F
Ambient Operating Temp
10 - 40 ºC / 50 - 104 ºF
Connections
USB-A:
Firmware Update,
Graphics and Profiles,
Dino-Lite USB Microscope
(models AM2011, AM2111)
USB-B:
PC Communication
RJ12:
Fume Extractor/Peripherals/Robot
MSE Module
Power
42 W
Vacuum
85 % / 640 mmHg / 25.4 inHg
Flow rate
35 SLPM
Ambient Operating Temp
10 - 40 °C / 50 - 104 °F
Pedal connector
Yes
Complies with CE standards
ESD safe
Weight and dimensions
PRODUCT COMPOSITION
1
MVE Pneumatic Desoldering Module for DDE & DME
SPECIFICATIONS
Selectable temperature
90 to 450 ºC / 190 to 840 ºF
Vacuum (at 6 bar)
90% / 680 mmHg / 26.8 inHg
Flow rate (at 6 bar)
15 SLPM
Air pressure supply
up to 6 bar
Connectivity
USB-B
Software PC / Traceability
USB-A
Firmware update.
Soldering Graphics / Profiles management.
Dino-Lite USB microscope connection. Compatible models: AM2011 and AM2111.
Robot
RS-232 remote control or Smart Fume Extractor connection
LAN
Remote control / Traceability
Equipotential bonding
Optional connection to EPA

ESD/EOS
ESD safe
Tip-to-ground resistance
<2 ohms
Tip-to-ground voltage
<2 mV RMS

Power supply
Peak power
160 W per tool – 23.5 V
Operating temp. range
10 to 50 ºC / 50 to 120 ºF
Weight and dimensions
Control Unit
148 x 120 x 232 mm / 4.57 kg
5.8 x 4.7 x 9.1 in / 10.08 lb
Weight and dimensions