DMPSE / DMPVE4 Tools DME Station
CDE-S - Smart Precision Soldering

CDE-S

Smart Precision Soldering

CDE-B - Smart Standard  Soldering

CDE-B

Smart Standard Soldering

CAE - 	Smart Standard Solder Feed

CAE

Smart Standard Solder Feed

CD-S - Precision Soldering

CD-S

Precision Soldering

CD-B - Standard Soldering

CD-B

Standard Soldering

CP - Precision Micro Tweezers

CP

Precision Micro Tweezers

CS - Desoldering with Electric Pump

CS

Desoldering with Electric Pump

CA - Standard Solder Feed

CA

Standard Solder Feed

CV - Desoldering with Pneumatic Pump

CV

Desoldering with Pneumatic Pump

DDPE - Precision 2 Tools T210 & Tweezers

DDPE

Precision 2 Tools T210 & Tweezers

DDSE - 2 Tools DDE with Electric Pump

DDSE

2 Tools DDE with Electric Pump

HDE - Heavy Duty

HDE

Heavy Duty

HDE-K - Heavy Duty Tweezers

HDE-K

Heavy Duty Tweezers

AL - Auto-Feed Soldering

AL

Auto-Feed Soldering

DMSE - 2 Tools DMSE with Electric Pump

DMSE

2 Tools DMSE with Electric Pump

SF - Automatic Solder

SF

Automatic Solder
Feeder

WS - High-Temperature Wire Stripper Station

WS

High-Temperature Wire Stripper Station

DMPSE - 4 Tools DME with Electric Pump

DMPSE

4 Tools DME with Electric Pump

SRWS-S - SMD Rework System

SRWS-S

SMD Rework System

JTSE - Standard Hot Air

JTSE

Standard Hot Air

TESE - Precision Hot Air

TESE

Precision Hot Air

RMSE - Compl. Rework with Electric Pump

RMSE

Compl. Rework with Electric Pump

JNASE - High Precision Hot Air

JNASE

High Precision Hot Air

NASE - Nano Rework

NASE

Nano Rework

NANE - Nano Soldering

NANE

Nano Soldering

CDE-S - Smart Precision Soldering

CDE-S

Smart Precision Soldering

CDE-B - Smart Standard  Soldering

CDE-B

Smart Standard Soldering

CAE - 	Smart Standard Solder Feed

CAE

Smart Standard Solder Feed

CD-S - Precision Soldering

CD-S

Precision Soldering

CD-B - Standard Soldering

CD-B

Standard Soldering

CP - Precision Micro Tweezers

CP

Precision Micro Tweezers

CS - Desoldering with Electric Pump

CS

Desoldering with Electric Pump

CA - Standard Solder Feed

CA

Standard Solder Feed

CV - Desoldering with Pneumatic Pump

CV

Desoldering with Pneumatic Pump

DDPE - Precision 2 Tools T210 & Tweezers

DDPE

Precision 2 Tools T210 & Tweezers

DDSE - 2 Tools DDE with Electric Pump

DDSE

2 Tools DDE with Electric Pump

HDE - Heavy Duty

HDE

Heavy Duty

HDE-K - Heavy Duty Tweezers

HDE-K

Heavy Duty Tweezers

AL - Auto-Feed Soldering

AL

Auto-Feed Soldering

DMSE - 2 Tools DMSE with Electric Pump

DMSE

2 Tools DMSE with Electric Pump

SF - Automatic Solder

SF

Automatic Solder
Feeder

WS - High-Temperature Wire Stripper Station

WS

High-Temperature Wire Stripper Station

DMPSE - 4 Tools DME with Electric Pump

DMPSE

4 Tools DME with Electric Pump

SRWS-S - SMD Rework System

SRWS-S

SMD Rework System

JTSE - Standard Hot Air

JTSE

Standard Hot Air

TESE - Precision Hot Air

TESE

Precision Hot Air

RMSE - Compl. Rework with Electric Pump

RMSE

Compl. Rework with Electric Pump

JNASE - High Precision Hot Air

JNASE

High Precision Hot Air

NASE - Nano Rework

NASE

Nano Rework

NANE - Nano Soldering

NANE

Nano Soldering

DMPSE / DMPVE
4 Tools DME Station

The DMPSE / DMPVE station is a complete solution to rework circuits and it comes with the T245 General Purpose Handle, the DR560 Desoldering Iron, the T210 Precision Purpose Handle and the AM120 Adjustable Micro Tweezers

The DME Control Unit manages up to 4 tools simultaneously and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools.

The Desoldering Module generates the vacuum needed to remove the molten solder from plated through hole and surface mount pads with the DR560. There are two stations models, the DMPSE which works with an electric pump and the DMPVE which works with compressed air supply.

It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.

It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.
P-405 - Pedal
Equipped with Electric Pump:
DMPSE-9QA
100 V
DMPSE-1QA
120 V
DMPSE-2QA
230 V
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Vacuum (at 6 bar)
75% / 570 mmHg / 22.4 inHg
Flow rate (at 6 bar)
9 SLPM

Connectivity
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update.
Soldering Graphics / Profiles management.
Dino-Lite USB microscope connection. Compatible models: AM2011 and AM2111.
Robot
RS-232 remote control or Smart Fume Extractor connection
LAN
Remote control / Traceability
Equipotential bonding
Optional connection to EPA

ESD/EOS
ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS

Power supply
Peak power
160 W per tool – 23.5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Control Unit
148 x 120 x 232 mm / 4.57 kg
5.8 x 4.7 x 9.1 in / 10.08 lb
Package
368 x 474 x 195 mm / 11.11 kg
14.5 x 18.7 x 7.7 in / 24.49 lb
Equipped with Pneumatic Pump:
DMPVE-9QA
100 V
DMPVE-1QA
120 V
DMPVE-2QA
230 V
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Vacuum (at 6 bar)
90% / 680 mmHg / 26.8 inHg
Flow rate (at 6 bar)
15 SLPM
Air pressure supply
up to 6 bar
Connectivity
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update.
Soldering Graphics / Profiles management.
Dino-Lite USB microscope connection. Compatible models: AM2011 and AM2111.
Robot
RS-232 remote control or Smart Fume Extractor connection
LAN
Remote control / Traceability
Equipotential bonding
Optional connection to EPA

ESD/EOS
ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS

Power supply
Peak power
160 W per tool – 23.5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Control Unit
148 x 120 x 232 mm / 4.57 kg
5.8 x 4.7 x 9.1 in / 10.08 lb
Package
368 x 474 x 195 mm / 11.11 kg
14.5 x 18.7 x 7.7 in / 24.49 lb