DI1 Tool Control Unit

1 Tool Control Unit

This DI manages 1 tool for soldering or desoldering and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools.

The DI works with the JBC exclusive Heating System and the intelligent sleep & hibernation features to extend a tip´s life up to 5 times longer.

Using the menu you can personalize over 20 parameters to help manage the soldering process.

The USB connector allows to update software, create graphs and manage parameters from a PC.

For a basic working system, you need at least 1 stand, 1 tool and 1 cartridge.
DI-2D - 1 Tool Control Unit
100 V
120 V
230 V
Selectable parameters
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Special features
These modes lower soldering tip temperature when the tool rests in the stand in order to avoid oxidation and extending tip life.
Max. and min. temperature
Limit the temperature range in which the operator is allowed to work.
Temperatue levels
Instant selection of up to 3 editable temperature settings for solder joints with different heat requirement.
PIN protection
Keep station parameters protected against unauthorized access.
USB-B (front)
Firmware upgrade / Software PC / Traceability
Equipotential bonding

ESD safe

Power supply
Peak power
130 W – 23.5 V
Ambient operating temp.
10 to 40 ºC / 50 to 104 ºF
Dimensions and weight
Control Unit
180 x 94 x 106 mm / 2.15 kg.
7.09 x 3.70 x 4.17 in / 4.75 lb.
220 x 213 x 160 mm / 2.50 kg.
8.66 x 8.39 x 6.30 in / 5.51 lb.
Follow us:
Copyright © 2011 JBC S.L. | Legal Notice | Privacy Policy | Terms and Conditions | Cookie policy | Site Map | RSS Feed | JBC Store | Contact Us