DDSE / DDVE2 Tools DDE Station

DDSE / DDVE
2 Tools DDE Station

The DDSE / DDVE station is a complete solution to rework circuits and it comes with the T245 General Purpose Handle and the DR560 Desoldering Iron.

The DDE Control Unit manages up to 2 tools simultaneously and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools.

The Desoldering Module generates the vacuum needed to remove the molten solder from plated through hole and surface mount pads with the DR560. There are two models, the DDSE which works with an electric pump and the DDVE which works with compressed air supply.

It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.

It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.

DDSE / DDVE - 2 Tools DDE Station
Equipped with Electric Pump:
DDSE-9QD
100 V
DDSE-1QD
120 V
DDSE-2QD
230 V
1
MSE Electric Desoldering Module for DDE & DME
Nominal power
370W
Peak power
150 W per tool
Selectable temperature
90 to 450 ºC / 190 to 840 ºF
Idle temp. stability (still air)
±1.5ºC / ±3ºF / Meets and exceeds IPC J-STD-001F
Vacuum
75% / 570 mmHg / 22.4 inHg
Flow rate
9 SLPM
Temperature accuracy
±3%
Temp. adjustment
±50ºC / ±90ºF Through station menu setting
Tip-to-ground resistance
<2 ohms
Tip-to-ground voltage
<2 mV RMS
Graphics and profiles
FAE / Robot connector
Remote control or FAE Fume Extractor connection
ESD safe
Meet ANSI/ESD S20.20-2021
Weight and dimensions
1
MVE Pneumatic Desoldering Module for DD & DM
Selectable temperature
90 to 450 ºC / 190 to 840 ºF
Vacuum
90% / 680 mmHg / 26.8 inHg
Flow rate
15 SLPM
Air pressure supply
up to 6 bar
Connectivity
USB-B
Software PC / Traceability
USB-A
Firmware update Soldering Graphics management
Robot
RS-232 remote control or Smart Fume Extractor connection.
Equipotential bonding
Optional connection to EPA

ESD/EOS
ESD safe
Tip-to-ground resistance
<2 ohms
Tip-to-ground voltage
<2 mV RMS

Power supply
Peak power
150 W per tool – 23.5 V
Operating temp. range
10 to 50 ºC / 50 to 120 ºF
Weight and dimensions
Control Unit
148 x 120 x 232 mm / 3.82 kg
5.8 x 4.7 x 9.1 in / 8.41 lb
Package
368 x 474 x 195 mm / 10.39 kg
14.5 x 18.7 x 7.7 in / 22.91 lb