CS-CVDesoldering Station
CS-CV
Desoldering Station

DS360 main features
The CS / CV Station is equiped with a Desoldering Module and is ideal for desoldering the smallest plated through hole components and removing solder from surface mount pads.

There are two models, the CS which works with an electric pump and the CV which works with compressed air supply.

This Station comes with the comfortable DS360 Micro Desoldering Iron which uses the JBC exclusive Heating System and the intelligent Sleep & Hibernation features.

As all the Compact Stations, the CS / CV has a menu with more than 10 parameters to customize the control unit.
Don’t believe us...
TRY IT!
CS-CV - Desoldering Station
REFERENCES
Equipped with Electric Pump:
CS-9F
100 V
CS-1F
120 V
CS-2F
230 V
PRODUCT COMPOSITION
SPECIFICATIONS
Peak power
40 W - 23.5 V
Selectable temperature
90 to 450 ºC / 190 to 840 ºF
Vacuum
75% / 570 mmHg / 22.4 inHg
Flow rate
9 SLPM
ESD safe
IEC/EN 61340-5-1
IPC J-STD-001
Equipotential bonding
Connection to EPA
Tip-to-ground resistance
<2 ohms
Tip-to-ground voltage
<2V peak
USB-A
Firmware update
Graphics and profile management
USB-B
PC communications
FAE / Robot connector
Remote control or FAE Fume Extractor connection
Net weight
4,00 kg (8.82lb)
Weight and dimensions
PRODUCT COMPOSITION
1
CV Control Unit
1
MV Pneumatic Desoldering Module
SPECIFICATIONS
Selectable temperature
180 to 450 ºC / 360 to 840 ºF
Vacuum
90% / 680 mmHg / 26.8 inHg
Flow rate
15 SLPM
Connectivity
USB-B
Software PC / Firmware update
Equipotential bonding
Optional connection to EPA
ESD/EOS
ESD safe
Tip-to-ground resistance
<2 ohms
Power supply
Peak power
40 W - 23,5 V
Operating temp. range
10 to 50 ºC / 50 to 120 ºF
Weight and dimensions
Control Unit
150 x 175 x 145 mm / 4.0 kg
5.9 x 6.9 x 5.7 in / 8.82 lb
Package
495 x 295 x 255 mm / 4.96 kg
19.5 x 11.6 x 10 in / 10.94 lb