CD-B
Soldering Station for General Purposes

This Station comes with the most versatile T245 Handle and allows soldering from small SMD passives (0201) to large thermal pads (DPAK) as well as THT components. This Handle works with the C245 Cartridges.

It comes with the JBC exclusive Heating System and the intelligent Sleep & Hibernation features.

Using the menu you can personalize over 20 parametes. It features a USB connector to updat and manage parameters from a PC.

A complete Cleaning System with antisplash membrane and wiper with sponge is integrated.

More than 400 cartridges are available.
Available in the following references:
120 V - Ref.

230 V - Ref.

100 V - Ref.

Selectable parameters
Temperature
90 to 450 ºC / 190 to 840 ºF
Special features
These modes lower soldering tip temperature when the tool rests in the stand in order to avoid oxidation and extending tip life.
Max. and min. temperature:
Limit the temperature range in which the operator is allowed to work.
Temperatue levels
Instant selection of up to 3 editable temperature settings for solder joints with different heat requirement.
PIN protection
Keep station parameters protected against unauthorized access.
Connectivity
USB-B
Software PC / Firmware update
Equipotential bonding
ESD/EOS
ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
Power supply
Peak power
130 W - 23,5 V
Voltage (AC)
Ref. CD-1BE - 120 V
Ref. CD-2BE - 230 V
Ref. CD-9BE - 100 V
Ambient operating temp.
10 to 40 ºC / 50 to 104 ºF
Dimensions and weight
Control Unit
150 x 175 x 145 mm / 2,67 kg
5.9 x 6.9 x 5.7 in / 5.88 lb
Package
234 x 234 x 258 mm / 3.15 kg
9.2 x 9.2 x 10.2 in / 6.94 lb
Modular System:
CD with tip cleaning system
Cartridges:
Consumables:
Cartridge Range
Compatible tools
Spare Parts
Follow us:
Copyright © 2011 JBC S.L. | Legal Notice | Privacy Policy | Terms and Conditions | Cookie policy | Site Map | RSS Feed | JBC Store | Contact Us