Solder Feeder

For Automated Processes

The SFR is designed for automatic solder wire transportation and is controlled by a PC/PLC.

To establish the communication between the SFR Solder Feeder and a Robot (PC or PLC) download the Communication Protocol for SFR at

Control parameters such as wire length and dispensing speed are customizable.

It features a wire detector sensor and in case of any transport error the system informs with "blocked up" or "consumed".

The Automatic Solder Feeder is compatible with several solder wire Guide Kits GSFR, these are available for different wire diameters and with or w/o Solder Wire Perforation

Guide Kits GSFR are not included.
CS2R245 - CS2R470 - Cartridge Stand
Selectable parameters
Solder wire length
0.5 to 250 mm / 0.02 to 9.84 in
Solder wire speed
0.5 to 120 mm/s / 0.02 to 4.72 in/s
Operation mode
Continuous / Discontinuous
Solder compatibility
Wire diameter
0.5 to 1.5 mm / 0.020 to 0.062 in
See available GSFR guides sets
Compatible Solder Reel
Max. weight
1 Kg / 2.2 lb
Max. length
80 mm / 3.2 in
Max. diameter
80 mm / 3.2 in
Axis hole
>10 mm / >0.39 in
Special features
Solder Wire Perforation
Specific GSFR guide sets for flux core perforation are available, allowing flux flow and outgassing to minimize solder splashing.
Solder wire detection
A built in encoder provides feedback when the solder is not being fed (solder reel finished or solder guide clogged).
ESD safe
Power supply
Voltage (DC)
24 V / 1.5 A required through M8
Ambient operating temp.
10 to 40 ºC / 50 to 104 ºF
Dimensions and weight
Feeder with reel holder
124 x 158 x 114 mm / 1.0 kg
4.9 x 6.2 x 4.5 in / 2.2 lb
215 x 130 x 120 mm / 1.3 kg
8.5 x 5.1 x 4.7 in / 2.9 lb

SFR-A Manual(2.06 Mb)

Exploded View:

CAD Files:
2D SFR-A(350 Kb)
3D SFR-A (.step)(2.69 Mb)
Follow us:
Copyright © 2011 JBC S.L. | Legal Notice | Privacy Policy | Terms and Conditions | Cookie policy | Site Map | RSS Feed | JBC Store | Contact Us