Complete Rework station with Electric Pump

RMSE-1D - Complete Rework station with Electric Pump
The quickest and safest solution for soldering and rework, also using Hot Air.

It consists of stackable modules and all the necessary accessories to make your job easier.

It works with the JBC exclusive heating system and the intelligent sleep & hibernation modes.

It features all the Excellence range benefits
and the JT-SD Stand that guarantees the
Auto-stop function when the heater is at rest.

The RMSE works simultaneously with the
DR560 Desoldering Iron, the T245
and the JT-TA Heater Hose Set
and is compatible with most JBC tools.
Net Weight14,55 kg (32.09lb)
Voltage120 V / 230 V / 100 V
Input FuseDDE:4A/ 2A/ 5A JT:8A/ 4A/ 8A
Output Peak PowerDDE: 150 W per tool
Nominal PowerJT: 700 W
Temperature selectionJT: 150-450ºC (300-840ºF) or Cool mode: Temp Off
DDE: 90-450 ºC (190-840 ºF)
Idle Temp. Stability (still air)DDE: ± 1.5 ºC (± 3 ºF)
Ambient operating temp.10-40 ºC (50-104 ºF)
Air Flow RegulationJT: 10-50 SLPM
Flow rateMSE: 9 SLPM
VacuumJT: 30% / 228 mmHg / 9 inHg
MSE:75%/570 mmHg/22.4 inHg
Rated currentJT: 6A/ 3A / 7A
Tip to ground resistanceDDE: <2 ohms
Tip to ground voltageDDE: <2 mV RMS
Communication connectorsJT: USB-B
Robot connectorDDE: RJ12 for RS-232 protocol
Pedal connectionJT and MSE: P-005 Pedal
ESD Safe
Package weight16,49 kg (36.36lb)
Package dimensions480 x 370 x 380 mm
(18.90 x 14.57 x 14.96 in)
Follow us:
Copyright © 2011 JBC S.L. | Legal Notice | Privacy Policy | Terms and Conditions | Cookie policy | Site Map | RSS Feed | JBC Store | Contact Us