
The Heater Set makes easier any soldering or desoldering job by applying infrared heat.
It allows you to work with lower temperatures, increase the tip life and reduce thermal stress.
The user can select two independent heating areas when working: back, front or “all zones”.
Using the console you can select the mode of operation: by power or by temperature.
JBC offers you 3 predefined temperature profiles and 10 more to personalize. Once a profile has been run, you can work without thermocouple.
It allows you to work with lower temperatures, increase the tip life and reduce thermal stress.
The user can select two independent heating areas when working: back, front or “all zones”.
Using the console you can select the mode of operation: by power or by temperature.
JBC offers you 3 predefined temperature profiles and 10 more to personalize. Once a profile has been run, you can work without thermocouple.
PRODUCT COMPOSITION
SPECIFICATIONS
Net Weight | 2.8 kg (6.2 lb) |
Dimensions: | 173 x 282 x 41 mm |
Voltage: | 100V/ 120V/ 230V |
Maximum Power: | 500VA |
Heating Area: | 65 or 130 x 135 mm (2 zones) |
Temperature Range: | 50 to 250ºC (120 to 482ºF) |
Temperature Measurement: | Thermocouple type K |
JBCset temperature profiles: | 3 profiles ( 2, 3 or 4 steps) |
User profiles: | 20 (up to 6 steps for each) |
Maximum work time: | 600min. or indefinite |
Fuse | 8 A T(100V&120V), 4 A T(230V) |
Package weight | 3.5 kg (7.7 lb) |
Package dimensions | 370x370x130 mm |