MV / MVEPneumatic Desoldering Module
MV / MVE Modules
Pneumatic Desoldering

The Pneumatic Desoldering Module is indispensable for a complete desoldering process.

By using compressed air and a Venturi valve, the system delivers excellent performance thanks to its instantaneous vacuum ramp.

The modules are supplied with easy-to-change filters to extend their service life.

They work with the ergonomic DT530 Angled Desoldering Iron, DS360 Micro Desoldering Iron, and DR560 Desoldering Iron, as well as their corresponding tips.

Clean and dry compressed air is required.

• MVE works with DDE or DME Control Units.

• MV works with DI Control Unit and discontinued DD or DM Control Units.
Don’t believe us...
TRY IT!
PNEUMATICMODULES - Pneumatic Desoldering Module
REFERENCES
MV-A
For DI
MVE-A
For DDE & DME
PRODUCT COMPOSITION
1
MV Pneumatic Desoldering Module
1
MVE Pneumatic Desoldering Module for DDE & DME
SPECIFICATIONS
Air pressure
4 - 6 Bar
Vacuum (at 6 bar)
90% / 680mmHg / 26.8inHg
Flow rate
15 SLPM
Pedal connector
ESD safe
Meet ANSI/ESD S20.20-2021
Weight and dimensions
Control Unit
225 x 145 x 55 mm / 0.68 kg.
8.86 x 5.71 x 2.17 in / 1.50 lb.
Package
280 x 195 x 115 mm / 0.98 kg.
11.02 x 7.68 x 4.53 in / 2.16 lb.