PHSE - IR Preheater

IR Preheater

PHSE

PHSE-K - IR Preheater Set

IR Preheater Set

PHSE-K

PHB-KA - Convection Preheater Set

Convection Preheater Set

PHB-KA

PHB - Convection Preheater

Convection Preheater

PHB

PHB-SA - Convection Preheater Support

Convection Preheater Support

PHB-SA

PHS-SA - IR Preheater Support

IR Preheater Support

PHS-SA

PHSE
IR Preheater

PHSE - IR Preheater
The PHSE is the best sollution for preheating multilayer PCBAs, and it works with infrared radiation.

It allows to heat up gradually, reducing risk of thermal shock in the substratre and components, and to work with lower temperature on components connected to ground planes.

It features, along with the power and temperature mode, a powerful functionality of profiles to perform rework tasks. Temperature is sensed with an external thermocouple and the heat is autoregulated by the console, capable to store up to 25 different profiles.

Connecting up to 4 external TCs provides a high-precise close-loop control of the component/PCBA during the heating process. It can also be used to protect a component or a specific area of the PCBA.

It has 2 independent work zones that define a heating area of 65x135 or 130x135 mm (2.559x5.315 or 5.118x5.315 in).
PHSE-9A
100 V
PHSE-1A
120 V
PHSE-2A
230 V
- 1
PHSE Heater unit
- 1
ACE-A Console
Selectable Temperature
50 to 250 ºC / 120 to 482 ºF
Heating area
65x135 mm (2.56 x 5.31 in) - 1 zone
130x135 mm (5.12 x 5.31 in) -2 zones
Temperature measurement
Thermocouple type K
Connectivity
USB-B (rear)
Software PC
USB-A (front)
Firmware update / Graphics management
Robot
RS-232 remote control
Aux
Console connection
Pedal
Connect a pedal (ref.P-005) to control the heater.
ESD/EOS
ESD safe
Power supply
Maximum power
500 W
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Heater unit
195 x 288 x 41,5 mm / 2,8 kg
7.68 x 11.34 x 1.63 in / 6.13 lb
Follow us: