NANE
2 Tools Nano Soldering station

The best solution for soldering and rework of SMD components requiring the highest precision.

It works simultaneously with two NT115 Nano Handpieces. The short distance from the tip to the handle offers maximum control even when using a microscope.

The NANE-C comes with the new Temperature Dynamic Profiles functionality.

The use of these profiles allows you to control the temperature of the component during all the phases of the soldering process, emulating the heating process in a reflow oven.

Its easy to use menu is configurable in 10 different languages: English, German, Spanish, French, Italian, Portuguese, Russian, Japanese, Korean and Chinese.

The NASE-C Rework Station works with the C115 Cartridge Range.
100 V - Ref.
NANE-9C

120 V - Ref.
NANE-1C

230 V - Ref.
NANE-2C

NANE - 2 Tools Nano Soldering station
Selectable parameters
Temperature
90 to 450 ºC / 190 to 840 ºF
Dynamic Soldering Profiles
Designed to avoid thermal shock when soldering Ceramic Chip components like MLCC,
this new and unique feature allows controlling the heating ramp up rate of the tool to gradually increase the temperature of the component through all the phases of the soldering process.
Up to 25 fully configurable soldering profiles can be stored.
Special features
These modes lower soldering tip temperature when the tool rests in the stand in order to avoid oxidation and extending tip life.
Max. and min. temperature:
Limit the temperature range in which the operator is allowed to work.
Temperatue levels
Instant selection of up to 3 editable temperature settings for solder joints with different heat requirement.
Soldering graphics
Real time visualization of tip temperature and power delivered to the solder joint during soldering process.
PIN protection
Keep station parameters protected against unauthorized access.
10 user interface languages
English, German, Spanish, French, Italian, Portuguese, Russian, Japanese, Korean, Chinese.
Connectivity
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update Soldering Graphics management
Robot
RS-232 remote control or Smart Fume Extractor connection.
Pedal ( 1 per tool)
Connect a pedal (ref.P-005) to control the tools. It allows using Nano tweezers for soldering.
Equipotential bonding

ESD/EOS
ESD safe
Tip to ground resistance
< 2 ohms
Tip to ground voltage
< 2 mV RMS

Power supply
Peak power
14 W per tool – 8.5 V
Voltage (AC)
ref. NANE-1C - 120 V
ref. NANE-2C - 230 V
ref. NANE-9C - 100 V
Ambient operating temp.
10 to 40 ºC / 50 to 104 ºF
Dimensions and weight
Control Unit
170 x 90 x 135 mm / 2,50 kg
6.7 x 3.5 x 5.3 in / 5.40 lb
Package
280 x 280 x 164 mm / 2,94 kg
11.0 x 11.0 x 6.5 in / 6.49 lb

Manuals:
NANE Manual(3.06 Mb)

Exploded View:
Control Units:
NAE with tip cleaning system
Tools:
Cartridges:
Follow us:
Copyright © 2011 JBC S.L. | Legal Notice | Privacy Policy | Terms and Conditions | Cookie policy | Site Map | RSS Feed | JBC Store | Contact Us