The DMPSE / DMPVE station is a complete solution to rework circuits with T245 General Purpose Handle, DR560 Desoldering Iron, T210 Precision Purpose Handle and AM120 Adjustable Micro Tweezers
The DME manages up to 4 tools simultaneously and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools.
The Desoldering Module generates the vacuum needed to remove the molten solder from plated through hole and surface mount pads with the DR560. There are two staton models, the DMPSE which works with an electric pump and the DMPVE which works with compressed air supply.
It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.
It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.
The DME manages up to 4 tools simultaneously and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools.
The Desoldering Module generates the vacuum needed to remove the molten solder from plated through hole and surface mount pads with the DR560. There are two staton models, the DMPSE which works with an electric pump and the DMPVE which works with compressed air supply.
It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.
It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.
REFERENCES
Equipped with Electric Pump:
DMPSE-9QA
100 V
DMPSE-1QA
120 V
DMPSE-2QA
230 V
PRODUCT COMPOSITION
SPECIFICATIONS
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Vacuum (at 6 bar)
75% / 570 mmHg / 22.4 inHg
Flow rate (at 6 bar)
9 SLPM
Connectivity
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update.
Soldering Graphics / Profiles
management.
Dino-Lite USB microscope connection. Compatible models: AM2011 and AM2111.
Robot
RS-232 remote control or Smart Fume Extractor connection
LAN
Remote control / Traceability
Equipotential bonding
Optional connection to EPA
ESD/EOS
ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
Power supply
Peak power
160 W per tool – 23.5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Control Unit
148 x 120 x 232 mm / 4.57 kg
5.8 x 4.7 x 9.1 in / 10.08 lb
Package
368 x 474 x 195 mm / 11.11 kg
14.5 x 18.7 x 7.7 in / 24.49 lb
REFERENCES
Equipped with Pneumatic Pump:
DMPVE-9QA
100 V
DMPVE-1QA
120 V
DMPVE-2QA
230 V
PRODUCT COMPOSITION
SPECIFICATIONS
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Vacuum (at 6 bar)
90% / 680 mmHg / 26.8 inHg
Flow rate (at 6 bar)
15 SLPM
Air pressure supply
up to 6 bar
Connectivity
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update.
Soldering Graphics / Profiles
management.
Dino-Lite USB microscope connection. Compatible models: AM2011 and AM2111.
Robot
RS-232 remote control or Smart Fume Extractor connection
LAN
Remote control / Traceability
Equipotential bonding
Optional connection to EPA
ESD/EOS
ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
Power supply
Peak power
160 W per tool – 23.5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Control Unit
148 x 120 x 232 mm / 4.57 kg
5.8 x 4.7 x 9.1 in / 10.08 lb
Package
368 x 474 x 195 mm / 11.11 kg
14.5 x 18.7 x 7.7 in / 24.49 lb
Cartridge Range
Other Compatible Items
