DDSE / DDVE2 Tools DDE Station
HDE - Heavy Duty

HDE

Heavy Duty

HDE-K - HDE Tweezer Station

HDE-K

HDE Tweezer Station

DDSE / DDVE - 2 Tools DDE Station

DDSE / DDVE

2 Tools DDE Station

DMSE / DMVE - 2 Tools DMSE

DMSE / DMVE

2 Tools DMSE

DDPE - 2 Tools DDE Precision Station

DDPE

2 Tools DDE Precision Station

DMPSE / DMPVE - 4 Tools DME Station

DMPSE / DMPVE

4 Tools DME Station

AL - Auto-Feed Soldering Station

AL

Auto-Feed Soldering Station

SF - Automatic Solder

SF

Automatic Solder
Feeder

WS - High-Temperature Wire Stripper Station

WS

High-Temperature Wire Stripper Station

TESE - Precision Hot Air

TESE

Precision Hot Air

JTSE - Hot Air

JTSE

Hot Air

RMSE / RMVE - Complete Rework

RMSE / RMVE

Complete Rework

SRWS-S - SMD Rework System

SRWS-S

SMD Rework System

JNASE - Hot Air Station

JNASE

Hot Air Station

NASE - Nano Rework

NASE

Nano Rework

NANE - Nano Soldering

NANE

Nano Soldering

CDE-S - Smart Soldering Station

CDE-S

Smart Soldering Station

CDE-B - Smart Soldering Station

CDE-B

Smart Soldering Station

CAE - Solder Feed

CAE

Solder Feed

CD-S - Precision Soldering

CD-S

Precision Soldering

CD-B - General Purpose

CD-B

General Purpose

CA - Solder Feed

CA

Solder Feed

CS-CV - Desoldering

CS-CV

Desoldering

CP - Micro Tweezers

CP

Micro Tweezers

HDE - Heavy Duty

HDE

Heavy Duty

HDE-K - HDE Tweezer Station

HDE-K

HDE Tweezer Station

DDSE / DDVE - 2 Tools DDE Station

DDSE / DDVE

2 Tools DDE Station

DMSE / DMVE - 2 Tools DMSE

DMSE / DMVE

2 Tools DMSE

DDPE - 2 Tools DDE Precision Station

DDPE

2 Tools DDE Precision Station

DMPSE / DMPVE - 4 Tools DME Station

DMPSE / DMPVE

4 Tools DME Station

AL - Auto-Feed Soldering Station

AL

Auto-Feed Soldering Station

SF - Automatic Solder

SF

Automatic Solder
Feeder

WS - High-Temperature Wire Stripper Station

WS

High-Temperature Wire Stripper Station

TESE - Precision Hot Air

TESE

Precision Hot Air

JTSE - Hot Air

JTSE

Hot Air

RMSE / RMVE - Complete Rework

RMSE / RMVE

Complete Rework

SRWS-S - SMD Rework System

SRWS-S

SMD Rework System

JNASE - Hot Air Station

JNASE

Hot Air Station

NASE - Nano Rework

NASE

Nano Rework

NANE - Nano Soldering

NANE

Nano Soldering

CDE-S - Smart Soldering Station

CDE-S

Smart Soldering Station

CDE-B - Smart Soldering Station

CDE-B

Smart Soldering Station

CAE - Solder Feed

CAE

Solder Feed

CD-S - Precision Soldering

CD-S

Precision Soldering

CD-B - General Purpose

CD-B

General Purpose

CA - Solder Feed

CA

Solder Feed

CS-CV - Desoldering

CS-CV

Desoldering

CP - Micro Tweezers

CP

Micro Tweezers

DDSE / DDVE
2 Tools DDE Station

The DDSE / DDVE station is a complete solution to rework circuits and it comes with the T245 General Purpose Handle and the DR560 Desoldering Iron.

The DDE Control Unit manages up to 2 tools simultaneously and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools.

The Desoldering Module generates the vacuum needed to remove the molten solder from plated through hole and surface mount pads with the DR560. There are two models, the DDSE which works with an electric pump and the DDVE which works with compressed air supply.

It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.

It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.

CL8499 - Manual Tip Cleaner
Equipped with Electric Pump:
DDSE-9QC
100 V
DDSE-1QC
120 V
DDSE-2QC
230 V
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Vacuum
75% / 570 mmHg / 22.4 inHg
Flow rate
9 SLPM

Connectivity
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update Soldering Graphics management
Robot
RS-232 remote control or Smart Fume Extractor connection.
Equipotential bonding
Optional connection to EPA

ESD/EOS
ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS

Power supply
Peak power
150 W per tool – 23.5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Control Unit
148 x 120 x 232 mm / 3.82 kg
5.8 x 4.7 x 9.1 in / 8.41 lb
Package
368 x 474 x 195 mm / 10.39 kg
14.5 x 18.7 x 7.7 in / 22.91 lb
Equipped with Pneumatic Pump:
DDVE-9QC
100 V
DDVE-1QC
120 V
DDVE-2QC
230 V
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Vacuum
90% / 680 mmHg / 26.8 inHg
Flow rate
15 SLPM
Air pressure supply
up to 6 bar
Connectivity
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update Soldering Graphics management
Robot
RS-232 remote control or Smart Fume Extractor connection.
Equipotential bonding
Optional connection to EPA

ESD/EOS
ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS

Power supply
Peak power
150 W per tool – 23.5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Control Unit
148 x 120 x 232 mm / 3.82 kg
5.8 x 4.7 x 9.1 in / 8.41 lb
Package
368 x 474 x 195 mm / 10.39 kg
14.5 x 18.7 x 7.7 in / 22.91 lb