Precision Soldering Station

This Station is suitable for precision soldering with a T210 Handle, the ideal tool when working on populated PCBs or under a microscope, and works with C210 Cartridges.

It comes with the JBC exclusive Heating System and the intelligent Sleep & Hibernation features.

Using the menu you can personalize over 20 parameters.

It features a USB connector to update and manage parameters from a PC.

There is an integrated complete Cleaning System with antisplash membrane and wiper with sponge.

You can also connect the T245 Iron with any C245 Cartridge.
Available in the following references:
120 V - Ref.

230 V - Ref.

100 V - Ref.

Selectable parameters
90 to 450 ºC / 190 to 840 ºF
Special features
These modes lower soldering tip temperature when the tool rests in the stand in order to avoid oxidation and extending tip life.
Max. and min. temperature:
Limit the temperature range in which the operator is allowed to work.
Temperatue levels
Instant selection of up to 3 editable temperature settings for solder joints with different heat requirement.
PIN protection
Keep station parameters protected against unauthorized access.
Software PC / Firmware update
Equipotential bonding
ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
Power supply
Peak power
40 W - 23,5 V
Voltage (AC)
Ref. CD-1SE - 120 V
Ref. CD-2SE - 230 V
Ref. CD-9SE - 100 V
Ambient operating temp.
10 to 40 ºC / 50 to 104 ºF
Dimensions and weight
Control Unit
150 x 175 x 145 mm / 2.67 kg
5.9 x 6.9 x 5.7 in / 5.88 lb
234 x 234 x 258 mm / 3.10 kg
9.2 x 9.2 x 10.2 in / 6.82 lb
Modular System:
CD with tip cleaning system
Cartridge Range
Compatible tools
Spare Parts
Follow us:
Copyright © 2011 JBC S.L. | Legal Notice | Privacy Policy | Terms and Conditions | Cookie policy | Site Map | RSS Feed | JBC Store | Contact Us