DIN nitrogen station
120V - Ref. DIN-1A
230V - Ref. DIN-2A
Nitrogen generator module Ref. GN-A
230V - Ref. DIN-2A
Nitrogen generator module Ref. GN-A
The DIN-2A Nitrogen station combines 2 ways of transferring heat.
DIN-2A Nitrogen soldering 230V
The DIN-2A Nitrogen station combines 2 ways of transferring heat: - Firstly by direct contact between the solder tip and the joint just like any soldering iron. - Secondly as the extra heat radiated from the tip, its residual heat is transferred to the gas, providing unparalleled thermal efficiency.Includes:
- DN-SA stand.
- T245-NA Nitrogen handpiece with MN-A Nitrogen control module.
- MN-A Nitrogen flow regulator
- N2 Flow regulation: 0,5 - 3,5 LPM at 5 Bar.
- Max. Pressure: 6 Bar.
- Nitrogen generator module Ref.GN-A
120 V - Ref. DI-1A
230 V - Ref. DI-2A
*An external nitrogen circuit is needed or the nitrogen generator from JBC GN-A.
GN-A Nitrogen module generator
Generator of nitrogen gas GN-A;
Compressed air pressure: 4 to 6 Bar
Gas N2 concentration: Up to 99,9 %
Concentrated N2 gas flow: 1 to 2 NL/min.
Weight: 2 Kg.
Connectable Tools:
Connectable cartridges:
BASIC SPECIFICATIONS:
- Nominal power: 75W
- Peak power 140W
- Temperature selection: 90 - 450 ºC
- Weight: 1,2 Kg.
Includes:
- DN-SA stand.
- T245-NA Nitrogen handpiece with MN-A Nitrogen control module.
- MN-A Nitrogen flow regulator
- N2 Flow regulation: 0,5 - 3,5 LPM at 5 Bar.
- Max. Pressure: 6 Bar.
- Nitrogen generator module Ref.GN-A
120 V - Ref. DI-1A
230 V - Ref. DI-2A
*An external nitrogen circuit is needed or the nitrogen generator from JBC GN-A.
