Home (map of web) > Products> Advanced> Modular stations > Hot air stations > High power hot-air station JT 7700

HIGH POWER HOT AIR STATION

JT 7700	120V	Ref. 7700100
	230V	Ref. 7700200

The JT 7700 is for desoldering all types of SMD’s particulary QFPs and PLCCs of any size.

The station uses a system based on protector-extractors and hot-air flow, which makes desoldering clean and quick, while protecting the other components by concentrating the heat onto the IC.

A medium-sized SMD, for example, can be desoldered in 20 seconds.

RECOMMENDATION FOR USE

DISPLAY MESSAGES

SPECIFICATIONS:
	Power: 900 W
	Temperature selection: T.Amb.-455°C (200-850º F)
	Air flow settings: 6-45 l/min
	Antistatic control box “skin effect”
	Weight of complete system: 8,7 kg (19,18 lbs)
	Self-contained air pump for hot-air with electronic control of temperature and air-flow.
	Vacuum pump for holding ICs

JT 7700 includes:
	Control unit with 900 W heater.
	Extractor stand with 5 extractors, 5 protectors and 2 tripods.
	Control pedal, heater stand and set of accessories.

JT 7700	WE	120V	Ref. 7710100
	WE	230V	Ref. 7710200

Is supplied whithout accessories.

Process to desolder an IC with a JT 7700 station
	1. Lock the extractor 2. Hot-air melts the solder 3. IC is removed automatically
Time needed to desolder a medium - sized IC using this process: 20 seconds

Extractors range - Last Update: 10/10/2006

All documents are in PDF format, to view and print you need to install Adobe Acrobat Reader

Press here to download Adobe Acrobat Reader free.

JBC Rework, Soldering and Desoldering Techniques for Electronics

JBC Industrias S.A. - Ramón y Cajal, 3 - 08750 Molins de Rei (Barcelona) - Spain
Tel.: +34 93 3253200 - Fax: +34 93 6804970 - E-mail: info@jbctools.com
NIF: A-08244824
Copyright © 2007 JBC Industrias S.A.

Process to desolder an IC with a JT 7700 station

JBC Rework, Soldering and Desoldering Techniques for Electronics