Contact Us Go Back
Home (map of web) > Products> Advanced> Soldering and desoldering tools > Desoldering tools > Desoldering irons

DESOLDERING IRON
DR 5650 Ref. 5650000
Manual Exploded view
Easy to clean and maintain.
You can choose from two different types of deposits: metal and glass.
Tips can be exchanged by simply loosening a screw.
The most important improvement introduced with this new desoldering iron is the "screw-fit" desoldering tips system included in the heating element : it enhances thermal conductivity as well as solder intake.
It is supplied with accessories kit.

The desoldering iron DR 5650 Ref. 5650000 is the new version of the desoldering iron DR5600 Ref. 5600000.
DR 5650 Desoldering iron
The range of desoldering tips is the following:
HEATING ELEMENT FOR DESOLDERING DR5650
Ref.: 5650-010


DR 5650 TIPS FOR DESOLDERING
Ref.
5600-001 HT
 Ref.
5600-002 HT 
 Ref.
5600-003
 Ref.
5600-004
 Ref.
5600-005
 Ref.
5600-006
 Ref.
5600-007
A ø 1.4 mm. 1.8 mm. 2.7 mm. 3.2 mm. 3.4 mm. 4.2 mm. 4.8 mm.
B ø 0.6 mm. 0.8 mm. 1.0 mm. 1.3 mm. 1.6 mm. 2.0 mm. 2.5 mm.
max pin ø 0.4 mm. 0.6 mm. 0.8 mm. 1.1mm. 1.4 mm. 1.7 mm. 2.3 mm.
High thermal performance Ref. HT: This kind of tip has great heat-transmission capability, and thus greater speed in desoldering. They are not quite as durable as the armoured long-life type.
Desoldering Process
Use the tip model with a larger diameter than the pad to be desoldered, so as to achieve maximum aspiration and thermal efficiency.
  1. Apply the desoldering iron tip so that the component terminal penetrates within its orifice.
  2. When the solder liquefies, start gently to rotate the desoldering tip so that the component's terminal can be eased away from the sides.
  3. Press then , not before, the vacuum pump push-button just long enough to aspirate the solder.
    1suction process 1 2suction process 2 3suction process 3
After pressing the desoldering key there is a slight delay until the self-contained vacuum pump stops, this is to make sure that the vacuum circuit is completely empty.
If any solder remains are left on any terminal after attempting to desolder it, resolder it with fresh solder and repeat the desoldering operation.and replaced if dirty or damaged.
 
PAD CLEANING TIPS
The shape of these tips, is especially designed to clean pads.
Ref.
5600-011
 Ref.
5600-012
 Ref.
5600-013
A ø 1.4 mm. 1.8 mm. 2.7 mm.
B ø 0.6 mm. 0.8 mm. 1.0 mm.
DR 5650
punto Manual - Last Update: 19/12/2007
punto Heating Element Manual - Last Update: 03/11/2006
punto Exploded view - Last Update: 19/12/2007
punto DR 5600 Desoldering tips

DR5600 desoldering iron
See the DR5600 desoldering iron video clip

Size: 992 Kb
Format: windows media (.wmv)
Search by reference    
Contact Us Go Back
Contact Us | Map of web | Legal Notice

JBC Rework, Soldering and Desoldering Techniques for Electronics


JBC Industrias S.A. - Ramón y Cajal, 3 - 08750 Molins de Rei (Barcelona) - Spain
Tel.: +34 93 3253200 - Fax: +34 93 6804970 - E-mail: info@jbctools.com
NIF: A-08244824
Copyright © 2007 JBC Industrias S.A.