Easy to clean and maintain.
You can choose from two different types of deposits: metal and glass.
Tips can be exchanged by simply loosening a screw.
The most important improvement introduced with this new desoldering iron is
the "screw-fit" desoldering tips system included in the heating
element : it enhances thermal conductivity as well as solder intake.
It is supplied with accessories kit. |
DR 5600 Desoldering iron |
|
| The desoldering iron DR 5600
Ref. 5600000 is the new version of the desoldering iron DR5570
Ref. 5570000. |
 |
The range of desoldering tips
is the following:
| HEATING ELEMENT FOR DESOLDERING DR5600 |
 |
Ref.:
5600-010 |
|
DR 5600
TIPS FOR DESOLDERING |
 |
Ref.
5600-001 HT
 |
Ref.
5600-002 HT
 |
Ref.
5600-003
 |
Ref.
5600-004
 |
Ref.
5600-005
 |
Ref.
5600-006
 |
Ref.
5600-007
 |
| A ø |
1.4 mm. |
1.8 mm. |
2.7 mm. |
3.2 mm. |
3.4 mm. |
4.2 mm. |
4.8 mm. |
| B ø |
0.6 mm. |
0.8 mm. |
1.0 mm. |
1.3 mm. |
1.6 mm. |
2.0 mm. |
2.5 mm. |
| max
pin ø |
0.4 mm. |
0.6 mm. |
0.8 mm. |
1.1mm. |
1.4 mm. |
1.7 mm. |
2.3 mm. |
| High
thermal performance Ref. HT: This kind of tip has great
heat-transmission capability, and thus greater speed in
desoldering. They are not quite as durable as the armoured
long-life type. |
|
| Desoldering Process |
| Use the tip model with a larger diameter than the pad
to be desoldered, so as to achieve maximum aspiration
and thermal efficiency. |
- Apply the desoldering iron tip so that the component
terminal penetrates within its orifice.
- When the solder liquefies, start gently to rotate
the desoldering tip so that the component's terminal
can be eased away from the sides.
- Press then , not before,
the vacuum pump push-button just long enough to aspirate
the solder.
|
After pressing the desoldering key there is a slight
delay until the self-contained vacuum pump stops, this
is to make sure that the vacuum circuit is completely
empty.
If any solder remains are left on any terminal after attempting to desolder
it, resolder it with fresh solder and repeat the desoldering operation.and
replaced if dirty or damaged. |
| |
|
| PAD CLEANING TIPS |
The shape of these tips, is especially
designed to clean pads.
 |
Ref.
5600-011
 |
Ref.
5600-012
 |
Ref.
5600-013
 |
| A ø |
1.4 mm. |
1.8 mm. |
2.7 mm. |
| B ø |
0.6 mm. |
0.8 mm. |
1.0 mm. |
|
|
| DR 5570 Desoldering
iron - Up to serial nº: 88005 2002 |
 |
| HEATING ELEMENT FOR DESOLDERING DR5570 |
 |
Ref.: 5570-010 |
|
| LONG - LIFE DESOLDERING TIPS |
Ref. 5250-001
|
Ref. 5250-002
|
Ref. 5250-003
|
Ref. 5250-004
|
Ref. 5250-005
|
Ref. 5250-006
|
Ref. 5250-007
|
|
 |
5250 |
001 |
002 |
003 |
004 |
005 |
006 |
007 |
| A outer ø |
1.3 |
1.7 |
2 |
2.5 |
2.8 |
3.3 |
4.2 |
| B hole ø |
0.6 |
0.8 |
1.0 |
1.3 |
1.5 |
1.8 |
2.4 |
máx
pin ø
to desolder |
0.4 |
0.6 |
0.8 |
1.0 |
1.3 |
1.6 |
2.2 |
Neither the new heating element (Ref.: 5600010) nor the new
desoldering tips are compatible with desoldering irons DR 5550,
DR 5560 or DR 5570.
Supply of DR 5570 desoldering irons and corresponding accesories (heating element,
desoldering tips and spare parts) will continue. |
