Range of stands covering the variety of advanced series tools. The stands
are situated between the tool and the control unit, which makes the Advanced systems
advantages possible. For example, one advantage is the temperature reduction in the “sleep” mode
when the tool is put in its stand, thus obtaining an extended tip-life and avoiding
oxidation of the tip’s solder plating.
The cartridge estractor system in the stands AD 8211, AD 8241 and MN 8861 enable switching
cartridge models without interrupting work.
All the stands can be connected to any of the advanced series stations except for the
Singles in which the stand is incorporated. |
 |
 |
|
For 2210 handpieces. |
For 2245 handpieces. |
 |
 |
For PA 1200 micro tweezers.
|
For PA 4200 tweezers. |
 |
 |
|
For the AP 1300 solder feed iron. |
For the DR 3600 desoldering irons. |
 |
 |
|
For the DR 5650 desoldering irons. |
For the AL 2510 soldering iron |
 |
 |
|
For the Nitrogen 2245handpiece. |
For the 2245/4700 handpiece. |
 |
 |
|
For the JT 7800 heater. |
For the TE 5400 heater. |
Total independent lengthening
as accessory adaptable to all the stands. |
| Lengthening cable stands kit |
Ref. 0781286 |
 1,5 m Silicon Antiestatic cable 7x0,35.
1 Binder 7 channels male Connector.
1 Binder 7 air channels female connector. |
| Desold silicon tube lengthening Kit |
Ref. 0781287 |
1,5m Silicon antiestatic cable 6x3.
1 Conex-tube vacuum pump. |
|
| SPONGES click
here to see our complete range. |
